Loading...
USER GUIDE
USER MANUAL MANUEL D'UTILIZATION
18 VOLT RADIO + EINS
RADIO DE 18 V ONE+
RADIO DE 18 V ONE+
P742
Wireless | Technology |
INDEX | INDEX | INDEX | |||||
**************** | **************** | **************** | |||||
Important safety instructions........ | 2-3 | Important notes about | safety instructions | ||||
Symbol | 4 | Security........................................ | 2-3 | important................................................. ... | 2-3 | ||
Symbol | 4 | Symbol | 4 | ||||
Sentence | 5 | ||||||
Montage | 5 | armed | 5 | ||||
operation | 5-7 | ||||||
Use | 5-7 | work | 5-7 | ||||
maintenance | 8 | ||||||
Interview | 8 | maintenance | 8 | ||||
illustrations | 9-10 | ||||||
illustrations | 9-10 | illustrations | 9-10 | ||||
Spare Parts/Service Order | back | ||||||
Parts Ordering/Troubleshooting | Parts/Service Orders | ||||||
....................................... end of page | ...................................... p. rear | ||||||
NOTE:To reduce that | NOTE:Pour | EMBARGO:To reduce |
Risk of injury, the user must read and | reduce the risk of injury, | elriesgodelesiones, elusuariodebeleer |
understand the operating instructions | the user must read and ensure this | and understand the operating instructions |
before using this product. | have understood the operating instructions beforehand | before using this product. |
to use this product. | ||
KEEP THIS MANUAL | KEEP THIS MANUAL | KEEP THIS MANUAL |
FUTURE REFERENCE | FOR FUTURE REFERENCE | FOR FUTURE INQUIRIES |
IMPORTANT SAFETY INSTRUCTIONS
NOTE!
Read THESE instructions.Failure to follow any of the instructions below may result in electric shock, fire and/or serious injury.
SAVE INSTRUCTIONS
PLEASE HEED ALL WARNINGS
FOLLOW ALL INSTRUCTIONS
Do not use this device near water.
Clean only with a dry cloth.
Do not block any ventilation openings.Install according to the manufacturer's instructions.
Do not install the device near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
Only use attachments/accessories specified by the manufacturer.
Leave all maintenance work to qualified service personnel.
Servicing is required when the device has been damaged in any way, liquid has been spilled or objects have fallen into the device, the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
When repairing a product, use only identical replacement parts. Follow the instructions in the maintenance section of this manual.Use of unauthorized parts or failure to follow maintenance instructions may result in risk of electric shock or injury.
Know your product. Read the user manual carefully. Familiarize yourself with its uses and limitations, as well as the specific potential hazards associated with this product.
Following this rule will reduce the risk of electric shock, fire, or serious injury.
Do not operate products in potentially explosive atmospheres, such as B. in the presence of flammable liquids, gases or dust.Products produce sparks which may ignite dust or fumes.
ELECTRIC SECURITY
A battery-powered product with built-in batteries or a separate battery must only be charged with the charger specified for the battery.A charger designed for one type of battery may present a fire hazard when used with another battery.
Only use battery-powered products with specially designed batteries.Using other batteries may cause a fire hazard.
For use with 18VFor 18V lithium-ion and nickel-cadmium batteries, see Tool/Appliance/Battery/Charger Correlation Supplement 987000-432.
PERSONAL SECURITY
Do not use on unstable ladders or stands.A stable base on a solid surface allows for better product control in unexpected situations.
Do not use the radio to listen to music or other audio programs while operating machinery.This can create distractions that can lead to serious injury.
This radio can generate sound levels that can be dangerous.longtime audience.Listening to music at high volume for a long time can cause itcauses noisedeafness. The higher the volume, the less time it takes for your hearing to be affected.
USE AND CARE OF THE PRODUCT
When the battery is not in use, keep it away from other metal objects such as: paperclips, coins, keys, nails, screws or other small metal objects that can connect from one port to another.Shorting the battery terminals together can cause sparks, burns, or fire.
Keep the radio and its handle dry, clean and free from oil and grease.Always use a clean cloth for cleaning. Never use brake fluid, gasoline, petroleum based products or strong solvents to clean the radio. Following this rule reduces the risk of loss of control and damage to the plastic case.
Battery-powered products do not need to be plugged into an outlet; therefore they are always in working condition. Be aware of potential hazards when not using your battery-powered product or when changing accessories.Following this rule will reduce the risk of electric shock, fire, or serious injury.
Do not place battery products or their batteries near fire or heat.This reduces the risk of explosion and possible injury.
Do not crush, drop or damage the battery. Do not use batteries or chargers that have been dropped or subjected to strong impact.A damaged battery can explode. Promptly dispose of a damaged or damaged battery properly.
Batteries can explode in the presence of an ignition source such as a pilot light.To reduce the risk of serious injury, never use a cordless product near an open flame. An exploded battery can release dirt and chemicals. In case of contact, rinse immediately with water.
Do not charge the battery product in a damp or wet place.Following this rule reduces the risk of electric shock.
For best results, your battery should be charged in an area where the temperature is above 50°F but below 100°F.To reduce risk of serious injury, do not store outdoors or in vehicles.
2 - English
IMPORTANT SAFETY INSTRUCTIONS
Battery leakage may occur under extreme conditions of use or temperature. If liquid contacts skin, wash immediately with soap and water. If the liquid gets into your eyes, flush your eyes with clean water for at least 10 minutes and then seek medical attention immediately.Following this rule reduces the risk of serious injury.
nTo reduce the risk of injury and electric shock, do not throw the product or place it within the reach of small children.
keep instructions.Refer to them frequently and use them to instruct others who may use this product. If you lend this product to someone else, please lend this manual as well.
BLUETOOTH®LICENSE STATEMENT
O BLUETOOTH®The words and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by TECHTRONIC POWER TOOLS TECHNOLOGY LIMITED is under license. Other trademarks and trade names are those of their respective owners.
CALIFORNIA PROPOSAL 65
NOTE:This product may contain chemicals, including lead, known to cause cancer, birth defects or other reproductive harm.Wash hands after handling.
FCC COMPLIANCE
NOTE:
Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
USE:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. This Class B digital apparatus complies with Canadian ICES-003. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the distance between device and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
3 — English
SYMBOL
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL | SIGNAL | IMPORTANCE |
REGARD: | Indicates an imminently hazardous situation which, if not avoided, will result in | |
in the event of death or serious injury. | ||
NOTE: | Indicates a potentially hazardous situation which, if not avoided, could result | |
in the event of death or serious injury. | ||
CAREFUL: | Indicates a potentially hazardous situation which, if not avoided, could result | |
minor or moderate injuries. | ||
TO NOTICE: | (Without the safety alert icon) Indicates important information not related to a | |
risk of injury, such as B. A situation that could lead to property damage. | ||
Some of the following symbols may be used on this product. Please study them and learn their meaning. Correct interpretation of these symbols will allow you to use the product better and safer.
SYMBOL | NAME | DESIGNATION / DECLARATION |
security alert | Indicates a potential risk of injury. | |
Read the user manual | To reduce the risk of injury, the user must read and understand the | |
tor manual before using this product. | ||
eye protection | Always wear eye protection with appropriately labeled side shields | |
com ANSI Z87.1. | ||
Electric shock alarm | Indicates non-insulated material inside the device which could cause damage | |
electric shock. Do not remove product cover. | ||
rain warning | Do not expose to rain or use in damp places. |
This product uses Nickel Cadmium (Ni-Cd) and Lithium Ion (Li-Ion) | ||
Recycling-Symbol | batteries. Local, state or federal law may prohibit disposal | |
ends up in the regular trash. Contact your local waste authority | ||
Information on available recycling and/or disposal options. | ||
direct current | Type or property of the stream | |
v | Volt | voltage |
C | Watt | allowed to |
Minimum | Protocol | Tempo |
4 — English
TO ADJUST
NOTE:
Do not use this product if it is not fully assembled or if any parts are missing or damaged. Use of a product that is not properly and completely assembled, or has damaged or missing parts, could result in serious injury.
NOTE:
Do not attempt to modify this product or create any accessory or attachment that is not recommended for use with this product. Any changes or modifications are unlawful and could result in a hazardous condition which could result in serious injury.
If any parts are damaged or missing, call 1-800-525-2579 for assistance.
OPERATION
NOTE:
Don't let familiarity with this product fool you. Remember that a careless fraction of a second is enough to cause serious injury.
NOTE:
Always remove the battery from the product when assembling parts, cleaning or when not in use. Removing these power sources will prevent accidental starts that could result in serious injury.
NOTE:
The radio is not waterproof. Do not immerse in liquid. Failure to heed this warning could result in serious injury.
TO NOTICE:
Always refer to the manual for any device recommended for use as an attachment or accessory. Proper use of any device connected to the radio is the sole responsibility of the operator. Improper use can damage the device or the product.
NOTE:
This radio can generate sound levels which, over the long term, can be harmful to your hearing. Listening to music at high volume for long periods of time can lead to noise-induced hearing loss. The higher the volume, the less time it takes for your hearing to be affected.
TO SHAPE
You can use this product for the following purposes:
Listen to FM/AM radio, MP3 players and other audio devices
Charging USB compatible devices
BLUETOOTH audio transmission®activated devices
INSERTING/REMOVING AAA BATTERIES
See Figure 1, page 9.
It is advisable to write down saved channels before replacing AAA batteries.
AAA batteries need to be replaced within 15 seconds. If the batteries are not replaced within 15 seconds the radio will lose all previously saved settings and will need to be reprogrammed.
Always use new alkaline batteries for replacement.
NOTE:
Danger of explosion if battery is changed incorrectly. Replace only with same or equivalent type.
Remove the battery if installed.
Loosen the screw on the battery compartment cover. Remove the door and set it aside.
Insert two new AAA batteries according to the polarity indicators inside the battery compartment.
USE:Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
Replace the battery cover and tighten the screw to secure it.
INSERTING/REMOVING THE BATTERY PACK
See Figure 2, page 9.
To install the battery:
Insert the battery into the radio and align the rib on the battery with the groove in the battery compartment.
Before operation, ensure the battery latches are engaged and the battery is secure in the radio.
5 — English
OPERATION
Press the latches to remove the battery.
USE:Always remove the battery from the radio when not in use.
FOLDABLE FLEXIBLE ANTENNA
To reduce interference or electrical noise, extend the antenna or move the radio higher. The antenna folds away and stays out of the way when not in use.
LCD SCREEN
When a battery is installed and the radio is switched on, the LCD display shows the time, frequency, mode and settings. If the battery is removed and AAA batteries are installed, the LCD display will only show the time.
USE:The LCD display images shown in this manual are only examples of the frequencies you may see on your radio and are not the exact frequencies you may wish to hear.
MENU NAVIGATION BUTTONS
See Figure 3, page 9.
Use the menu navigation keys to turn the radio on and off, adjust the volume, change frequencies, switch modes and set the time.
TURNING THE RADIO ON AND OFF:
Press the power button to turn the radio on and off.
When the radio is powered on and a battery is installed, the battery icon will appear on the LCD screen. When the battery charge is low, a flashing battery indicator is displayed.
ADJUSTING THE VOLUME:
When the radio is turned on, the device will return to the last used volume setting.
To increase the volume, press the buttonVO+Knopf.
To decrease the volume, press the buttonVOL-Knopf.
MODE SELECTION:
strainAWAYto scroll through the available modes. There are four modes to choose from:
FM only
AM mode
AUX-Modus
BLUETOOTH®Away
USE:On power up, the radio will return to the last used mode if the battery has not been disconnected. In the event of a power failure to the radio, the display will automatically switch to FM mode.
FM/AM-TUNE:
ÖSCANThe left and right arrow keys are used to set the desired radio frequency. The selected frequency is displayed on the LCD.
Briefly press the left arrow button to tune to a lower frequency. Briefly press the right arrow button to set a higher frequency.
Quickly press (do not hold) either button to set one frequency step at a time.
To reduce interference or electrical noise, adjust the antenna position or move the radio higher.
SAVING A PRESET TO MEMORY:
The memory function stores up to 20 frequencies as presets in the radio's memory. You can store up to ten (10) frequencies each for FM and AM mode.
Tune to the desired FM or AM frequency.
Hold down theDEFAULTuntil the word “MEMORY” and the preset position number flash on the screen.
strainSCANleft and right arrow keys to select a preset position number.
USE:There are ten (10) preset positions for FM and ten (10) for AM. Only one station can be stored in each preset position.
strainDEFAULTpress again to store the frequency.
SET PRESETS (FM OR AM MODE):
Press and releaseDEFAULTto scroll through each preset position number and associated frequency.
SETTING THE CLOCK:
The time appears on the LCD display when the radio is on.
Hold down theCLK/DSPYHold down until the hour digits start flashing.
strainVO+orVOL-button to select the time.
USE:The time is only displayed in 12-hour format. To select a time after noon and before midnight, switch the hours until "PM" appears in the display.
Press and releaseCLK/DSPYbutton to lock the time setting. "Minutes" starts flashing.
strainVO+orVOL-key to select the desired number.
Press and releaseCLK/DSPYpress again to confirm the time.
USE OF A TELEPHONE/MP3 PLAYER (NOT INCLUDED) WITH THE RADIO
See Figure 4, page 10.
strainAWAYup buttonFOR THEmode is highlighted.
The device can be held in position with the strap.
Connect the auxiliary cable (not included) to the device.
The phone/mp3 player must be on and in play mode for sound to be heard through the speakers.
All phone/MP3 player controls can be used normally while connected to the radio.
USE:The volume of each device connected via the Aux cable can be adjusted with the volume control
6 - English
OPERATION
for this device or via the radioVO+orVOL-Knopf.
Turning off the radio will NOT turn off the phone/mp3 player.
Auxiliary cable does NOT provide charging function.
For complete operating instructions for the connected device, always refer to the manual that came with the device.
USING A BLUETOOTH®DEVICE ACTIVATED (NOT INCLUDED) WITH THE RADIO
See Figure 5, page 10.
strainAWAYbutton up toBLUETOOTH®mode is highlighted.
When the radio is switched to BLUETOOTH®mode, the device attempts to pair with a BLUETOOTH®Device activated and “bt” flashes on the LCD display.
USE:The radio will automatically attempt to connect to the last paired device. If no connection can be established within five seconds, the radio becomes available for another BLUETOOTH®activated devices.
BLUETOOTH®enabled devices must be within 30 feet of the radio and set to search/scan to pair with the radio.
Select "RYOBI Radio" from the list of available BLUETOOTH devices®Signals to pair the device and radio. No password or PIN is required to connect.
When the device is successfully paired with the radio, “bt” will stop flashing.
USE:When a device is paired with the radio, the information for connecting to the device is stored in the radio's memory.
When streaming audio from a BLUETOOTH®Device activated, press buttonSCANleft and right arrow keys to go to the previous or next track. Briefly press and release the buttonDEFAULTto toggle between pausing and playing the audio.
USE:BLUETOOTH may not support these controls®Device and/or application you are using.
Todos BLUETOOTH®enabled device controls can be used normally while paired with the radio.
USE:The volume of each device paired with the radio can be adjusted using the volume control on that device or the button on the radio.VO+orVOL-Knopf.
To disconnect BLUETOOTH®device is activated, press and hold the buttonDEFAULTButton. When the device is disconnected, “bt” will start flashing on the LCD display and the radio will start searching for another device.
USING THE DEDICATED USB CHARGING PORT
The dedicated USB charging port provides 5 volt DC charging at up to 1 amp for your mobile phone, MP3 player or other USB device.
TO NOTICE:
Attempting to charge devices with more than 1A, such as a tablet, can damage the dedicated USB charging port and/or the device.
Connect one end of a USB cable (not supplied) to your USB device.
Plug the other end of the USB cable (not included) into the dedicated USB charging port to start charging your device.
USE:Dedicated USB charging port provides power only; it does not provide data communication capabilities.
7 - English
MAINTENANCE
NOTE:
In the event of service, only use identical spare parts. The use of other parts may present a hazard or damage the product.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercially available solvents and can be damaged by their use. Use clean rags to remove dirt, dust, oil, grease, etc.
NOTE:
Never allow brake fluid, petrol, mineral oil-based products, penetrating oils, etc. to come into contact with plastic parts. Chemicals can damage, weaken, or destroy plastic, which can result in serious injury.
NOTE: ILLUSTRATIONS START ON PAGE 9 AFTER THE FRENCH AND SPANISH SECTION.
8 — English
IMPORTANT SAFETY INSTRUCTIONS
NOTE !
READ THIS INSTRUCTION.Failure to follow all of the instructions below can result in electric shock, fire, and serious injury.
SAVE THESE INSTRUCTIONS. HEED ALL WARNINGS. READ ALL INSTRUCTIONS
Do not use this device near water.
Only clean the device with a dry cloth.
Do not block ventilation openings. Install the device according to the manufacturer's instructions.
Do not install the device near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.
Use only connectors or accessories specified by the manufacturer.
Have all repairs performed by qualified service personnel.If damaged, the device must be repaired; if, for example, liquid is spilled or objects fall into the device,einzelhas been exposed to rain or moisture, is not operating normally, or has been dropped.
Only use identical parts to the original parts for repairs. Follow the instructions in the maintenance section of this manual.
Use of unauthorized parts or failure to follow instructions may result in risk of electric shock or injury.
Know the product well. Read the user manual carefully. Familiarize yourself with the product's applications and limitations, and understand the specific hazards associated with its use.If you follow this instruction, this will be reduced
Risk of fire, electric shock and serious injuries.
Do not use the products in potentially explosive atmospheres, for example in the presence of flammable liquids, gases or dust.Products produce sparks that may ignite dust or fumes.
ELECTRIC SECURITY
The product's batteries, whether built-in or removable, must only be charged with the specified charger.A charger designed for one type of battery may present a fire hazard when used with a different type of battery.
Only use the product with the specified battery.Use of any other block may create a fire hazard.
To use the device with batteries18V Nickel-Cadmium-Li-Ion, see Charger/Tools/Battery/Device Connection Supplement No. 987000-432.
PERSONAL SECURITY
Do not use the product on an unstable ladder or stand.Proper retention and balance allow for better product control in unexpected situations.
Do not use two-way radios to listen to music or other audio streams while operating machinery.Failure to follow this instruction can cause distraction, which could result in serious injury.
This radio is powerful enough to cause long-term hearing damage.Listening to music at high volume for long periods of time can lead to noise-induced hearing loss. The louder the sound level, the less time it takes to damage your hearing.
USE AND CARE OF THE PRODUCT
When the battery is not in use, keep it away from metallic objects such as: clips, coins, nails, screws and other small metallic objects that can make contact between the two poles.settingsjurisdictionterminals of a battery
may cause sparks, burns or fire.
Keep the radio and its handle dry, clean and free from oil and grease.Always use a clean cloth for cleaning. Never use brake fluid, gasoline, or petroleum-based products to clean the radio. Following this instruction will reduce the risk of loss of control and damage to the plastic casing.
Battery-powered products that don't need to be plugged into an outlet are always ready to go. Be aware of potential hazards when not using the battery-powered product and when replacing accessories.Following these instructions will reduce the risk of fire, electric shock and serious injury.
Do not place a battery-powered product or its battery near an open flame or heat source.ceci
reduces the risk of explosion and injury.
Do not crush, drop or damage the battery. Do not use batteries or chargers that are damaged or have been subjected to severe impact.A damaged battery can explode. Promptly dispose of damaged batteries in an appropriate manner.
Batteries can explode in the presence of an ignition source such as a pilot light.To reduce the risk of serious injury, never use a cordless device near an open flame. An exploding battery can release dirt and chemicals. If exposed, wash affected areas immediately with water.
Do not charge a battery-powered product in a damp or wet place.Following this rule reduces the risk of electric shock.
For best results, charge the battery-powered product in a room where the temperature is between 10 and 38°C (50 and 100°F).Do not store the product
2 - French
FAQs
How do I pair my Ryobi Bluetooth radio? ›
Select “RYOBI Radio” from your device's list of available BLUETOOTH® signals to pair the device and the product. No password or PIN is required for connection. NOTE: - When the device has successfully paired with the radio, “bt” will stop flashing.
Does the Ryobi radio charge batteries? ›The radio will also charge a battery when plugged in. It will charge the older version or the Ryobi one battery. Charge time is one hour or less depending upon the battery. Speaking of power cords, the Ryobi power cord can easily be stored under the radio.
Does Ryobi have a radio? ›RYOBI introduces the 18V ONE+ Cordless Compact Radio with Bluetooth Wireless Technology (Tool-Only). The Compact Radio features integrated Bluetooth Wireless Technology providing users the ultimate versatility to stream full audio up to 30 ft.
How do I put my Bluetooth radio in pairing mode? ›- Activate Bluetooth on your Car Audio by pressing HOME, and going into the [Settings] menu.
- In the [Settings] menu, find [Bluetooth Connection].
- Select [Pairing]. ...
- The Car Audio System should appear in the section “Available devices” in your smartphone Bluetooth menu.
Store your batteries at half charge.
The battery chemistry is the most stable at half charge. Incidentally, they tend to perform at their highest potential at half charge as well. If you know you're storing your batteries for more than a couple of days, go ahead and get them to a half-charged state.
One quick note about the run time – using the 4.0 amp hour battery, the radio will easily last a day or more.
Are RYOBI tools made by Milwaukee? ›Who Owns Milwaukee Tools? Techtronic Industries Co Ltd (TTI) As it turns out, TTI owns Milwaukee Tool and a host of other power tool companies. It also licenses the RIDGID* and RYOBI names for cordless power tools (Emerson owns RIDGID).
How long does the RYOBI speaker last? ›Bluetooth range and over 10 hours of runtime on a RYOBI 18V ONE+ 4.0 Ah battery, this speaker is the perfect partner to get you through any job. The integrated handle allows you to bring bold sound with you, wherever you go.
What RYOBI tools are best? ›- 18V ONE+™ HP COMPACT BRUSHLESS 2-TOOL KIT. ...
- 18V ONE+™ The 18 GA Brad Nailer. ...
- 18V ONE+™ 5 inch Random Orbit Sander. ...
- 18V ONE+™ High Pressure Inflator. ...
- 4-Volt Lithium Screwdriver. ...
- 18V ONE+™ Brushless 7 1/4” Circular Saw. ...
- 18V ONE+™ 3 Gallon Project Wet/Dry Vacuum. ...
- 18V ONE+™ Brushless Jigsaw.
If your Bluetooth devices won't connect, it's likely because the devices are out of range, or aren't in pairing mode. If you're having persistent Bluetooth connection problems, try resetting your devices, or having your phone or tablet "forget" the connection.
How do I fix the Bluetooth pairing problem? ›
- Turn Bluetooth off and then on again. Learn how to turn Bluetooth on and off.
- Confirm that your devices are paired and connected. Learn how to pair and connect via Bluetooth.
- Restart your devices. Learn how to restart your Pixel phone or Nexus device.
Use the code 0000 when pairing with another Bluetooth® device. The passcode may appear as Pass key, PIN code, PIN number, or Password depending on the Bluetooth device used.
How do I get my speakers to pair? ›- Swipe down from the top of the screen.
- Touch and hold Bluetooth .
- Tap Pair new device. If you don't find Pair new device, check under "Available devices" or tap More. ...
- Tap the name of the Bluetooth device you want to pair with your device.
- Follow any on-screen instructions.
- On your Android phone or tablet, open the Google Home app .
- At the bottom, tap Home .
- Touch and hold your device.
- At the top right, tap Device settings Audio. Paired Bluetooth devices.
- Tap Enable pairing mode.
- Open Settings, and then tap Apps.
- Tap the Sort icon (the down arrow with three vertical bars), then tap Show system apps.
- Tap OK and all the system apps will appear in the list.
- Tap Bluetooth > Storage > Clear data.
- Tap OK to confirm.
Unlike lead-acid batteries, lithium iron phosphate batteries do not get damaged if they are left in a partial state of charge, so you don't have to stress about getting them charged immediately after use. They also don't have a memory effect, so you don't have to drain them completely before charging.
What kills lithium-ion batteries? ›Heat Kills Lithium-ion Battery Packs
Don't. Move them to your garage or somewhere you can temper the heat somewhat and reduce the pack temperature. High temperature kills lithium-ion batteries. Want to cut your number of cycles in half, store your packs in the heat fully charged.
Overcharging can damage a battery and shorten its life, and not all chargers shut off automatically. Don't Overheat Battery: Heat is deadly to rechargeable batteries and can even cause them to explode. If the battery gets hot to the touch, let it cool down before recharging or using.
What is the difference between Ryobi high performance battery and regular? ›High performance
A high-performance battery performs better than a standard battery. Ryobi defines its high-performance batteries as lasting two times longer while providing 30% more power than the company's standard battery.
How long is my battery under warranty? Your RYOBI battery is covered under a three year limited warranty. Keep your receipt and share information found on your receipt with our customer service team if you ever need assistance. If a battery comes in a kit (with the tool and charger), no receipt is required.
What does blinking light on Ryobi battery mean? ›
Red Light Flashing
Battery pack is either too hot, too cold or deeply discharged. This is NOT a fault condition. Wait for the charger to evaluate the battery condition. Once the battery pack reaches correct temperature or completes a precharge cycle the charger will begin charging mode.
...
How to wake a sleeping Lithium ion Battery pack
- Step 1: Browse the voltage. ...
- Step 2: Attach with a charger. ...
- Step 3: Browse the voltage once again. ...
- Step 4: Charge and discharge the battery. ...
- Step 5: Freeze the battery. ...
- Step 6: Charge the battery.
Ryobi enjoys more low-speed power, a less expensive price, and a deeper line of compatible tools. However, Craftsman is lighter, more compact, and isn't far behind in performance. Both are excellent choices for entry-level or light-duty professional work or as primary tools for DIYers.
Is it worth it to buy a RYOBI? ›When we do hands-on field testing we find that while RYOBI underperforms some of the top brands, they offer an incredible value. Pros appreciate tools like the Ryobi 18V brushless impact driver. It provides plenty of power for most tasks and costs just $99 for the bare tool.
Is RYOBI owned by China? ›Ryobi Limited (リョービ株式会社, Ryōbi Kabushiki-gaisha, Japanese: [ɾʲoːꜜbi]; English: /raɪˈoʊbi/ or /riˈoʊbi/) is a Japanese manufacturer of components for automobiles, electronics, and telecommunications industries.
Can you leave powered speakers on all the time? ›Heat is the enemy of all electronics — the longer your monitor speakers are left in a state of heat, the more problems you are introducing to the circuits and components. As much as a dream it would be to imagine that electronics have an infinite life span, this simply is not the case.
Can you leave a Bluetooth speaker plugged in all the time? ›Should you leave the speaker charging overnight. If you are using a Bluetooth speaker with a built-in battery, then it is perfectly safe to leave your speaker charging overnight.
What is the life expectancy of a speaker? ›Lifespan is defined as the maximum number of years that a human can live, while life expectancy is the average total number of years that a human achieves [5].
Is Ryobi owned by Home Depot? ›Ridgid and RYOBI are The Home Depot's flagship brands. RYOBI is marketed more towards the home DIYer while Ridgid is marketed more towards the professional.
Are brushless Ryobi tools better? ›RYOBI Brushless tools give better performance and increased endurance. Brushless technology gives RYOBI tools increased torque, 100% constant power in both forward and reverse, allows them to run cooler and quieter, and increases the lifetime of the tool.
What is the number 1 power tool brand? ›
| Rank | Power Tool Brand | Revenue (USD billions) |
|---|---|---|
| 1 | Bosch | 91.66 |
| 2 | DeWalt | 5.37 |
| 3 | Makita | 2.19 |
| 4 | Milwaukee | 3.7 |
First, remove all the paired devices from the speaker. Then, press and hold the Bluetooth button and the power button simultaneously for more than three seconds to reset the speaker to factory settings.
How do I pair two ion Bluetooth speakers? ›Be sure to disconnect any Bluetooth devices before attempting to link two speakers. Press and hold the Link button to enter Stereo Link mode. Once a link has been established, the word LINK will appear in the display. Then, repeat this process on the other Pathfinder 320 speaker.
How do I pair my m18 radio? ›ashing, select "Milwaukee" on the Bluetooth capable device. Enter PIN "0000". Once the device has successfully paired with the radio, the will be shown on the radio's display. To enter the Bluetooth mode, press the but- ton, or press the MODE button to cycle through to Bluetooth.
How do I enable and pair Bluetooth speakers? ›- Swipe down from the top of the screen.
- Touch and hold Bluetooth .
- Tap Pair new device. If you don't find Pair new device, check under "Available devices" or tap More. Refresh.
- Tap the name of the Bluetooth device you want to pair with your device.
- Follow any on-screen instructions.
On the bottom of the ION Audio Rock Speaker is a small reset button. By using the tip of a pen or the end of a paper clip and pushing in that button for about 3 seconds, the Rock Speaker will be set back to the default manufacturer's settings, ultimately resetting the firmware and saved Bluetooth connections.
Why wont my ION speakers Link together? ›Set the Primary speaker into Link mode. If voice prompts are on, you will hear an indication that this is the Primary speaker. As long as no device is connected to the Secondary speaker, you will now be able to set it to Link mode and it will connect to the Primary speaker. This may take up to a minute.
How do I reboot my Bluetooth speaker? ›If your wireless speaker does not have a RESET button
Press and hold the (power) button for about 10 seconds to reset (restart) the speaker.
Depending on the equipment you have, you may be able to connect to two Bluetooth speakers simultaneously. Newer technology comes equipped with Bluetooth 5 which allows you to pair with two devices at once. Other device manufacturers have developed their own similar solutions.
Can you use 2 Bluetooth speakers together? ›Dual Audio allows you to send your media audio to two different Bluetooth devices at once. This means that not only can you use two pairs of headphones at one time but you can share between two different sets of Bluetooth speakers as well.
How do I use two Bluetooth audio devices at once? ›
- On your Android device, tap Settings. Connected devices.
- Next to your device, tap Settings .
- Tap Multipoint. Use Multipoint.
- Connect your headphones with the 2 desired audio source devices. To make sure your headphones are connected, go to Bluetooth settings on the audio source device.
if RED and GREEN LED's once again begin to flash simultaneously the battery pack is damaged or faulty and will need to be replaced. Remove the battery pack from the Charger and unplug the Charger from the 120VAC power source – required to reset Charger PCB circuitry.
How do I reset my m18 radio? ›Simply, remove the two (2) AA batteries from its 'back-up battery' compartment for a couple of minutes (2 minutes minimum) allowing the micro-processor to reset. 2790-20 JobSite Radio should then again operate on either the DC or AC power supply. 2 AA batteries are required. 1.